|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use in transferring heat away from electrical and electronic devices such as; transistors, power diodes, semi-conductors, ballast's and thermocouple wells. High thermal conductivity, high dielectric constant, high dissipation factor, use with heat sinks or metal chassis, will not dry or harden. Contains zinc oxide and polydimethyl siloxane. 4 grams.
|
#1 White 1/25"(1mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
#2 Yellow 1/16"(1.5mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#3 Green 1/12"(2mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
#4 Blue 1/10"(2.5mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
#5 Brown 1/8"(3mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clean your most expensive screens with confidence. Our new and improved cleaning wipe now looks and cleans better than ever. Tougher wipes to prevent ripping during dispensing and an air tight cap for extended shelf life after opening. Also available in individual wipe format.
|
Use for removing dust, lint and foreign particles. This product is not designed for use near ignition sources. For cleaning in such circumstances, use MG Chemicals Super Duster 134. HFC 152a is rated as non-flammable when subjected to the 'Test for determining the the flashback and the length of the flame projection of flammable product enclosed in a spray container' of the Canadian Hazardous Products Act. This product is not defined as flammable by 1500.3 (c)(6),16 CFR, Fed. Haz. Substance Act, C.P.S.C. Regs.
|
Excellent for removing flux and general clean up. A 3-row toothbrush style general cleaning brush. Natural stiff hog hair bristles with 7 �� plywood handle. Can be used dry or wet. Works well with sticky or crusty materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General all-purpose cleaner. Safe on plastics. Extra effective with the use of M.G. Cat. #'s 852 and 853 Hog Hair cleaning brushes.
|
Cleans and restores sensitive magnetic and optical read/write heads. Removes nicotine, tape residues, metallic oxides, carbon deposits, oils, dirt.
|
Excellent utility brush. A 3-row general cleaning brush with brass steel bristles and 7 �" long plywood handle. Great for removing oxides and corrosion from male and female connector ends. Burnishes without removing base metal. Also great for cleaning soldering iron tips.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use when an aggressive cleaner degreaser is required and plastic compatibility or flammability is not a concern. Great for removing heavy oils and greases, burnt on flux, ionic residues, and difficult to remove soils. Very effective at cleaning and degreasing the solder side (non component) of PC boards. Extra effective with M.G. Cat. #'s 852 and 853 Hog Hair Cleaning Brushes.
|
This is MG Chemicals Polyimide Tape (POL100-15). It is a very lightweight and flexible tape at only 2 mils thick. This is a crystalline film with a silicone adhesive that is specially designed for 3D printers heated beds. The Tape works works great in low temperatures and doesn't soften when submitted to head. It also has a superior release surface at elevated temperatures. This polyimide tape has excellent tension strength, good elongation, and is chemical resistant. The tape comes in 4" width in a 49 Foot roll.
|
Chills to -51C (-60F) Used for locating thermal intermittence, locate PCB cracks, and cool solder joints. Protects heat-sensitive components during soldering. Also freezes gums and adhesives for easy removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains a unique blend of high purity solvents and special lubricating oils for restoring electronic continuity and lubricating moving parts. Perfect for cleaning and lubricating locks, relays, hinges, controls, signals, contacts, selector switches, office equipment, power tools, servomechanisms, and equipment needing greaseless lubrication.
|
This is MG Chemicals Wood Filament (WOOD17W5) that is made for 3D printing. This filament is made with a blend of polylactic acid and wood particles. This unique material acts like wood. It can be sanded and painted and it even has a wood smell to it. This is great for hobbyist who wants to use a different material with their 3D printer. There is no heating bed required while using the wood filament. The printing temperature for this type of filament runs from 365 to 446 Degrees Fahrenheit, and different temperatures will affect the color of the wood filament.
|
Contains isohexanes. Use when a zero residue contact cleaner is required. An effective and powerful cleaner that quickly penetrates and dissolves most soil types. For use on most electronic parts and equipment including connectors, contacts, LED's, PCB's, components, circuit breakers, tuners and microprocessors. Variable valve allows user to control rate of flow. Extra effective with the use of M.G. hog hair brushes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleans and protects with electronic grade silicones for lubrication. Suitable for use on tuners, switches, locks, contacts, office equipment, keyboards, plastic parts, mold releases, battery terminals, ignition systems, rubber gaskets, and telescoping antennas.
|
Lint free, synthetic suede bonded to a bendable handle allowing access to hard to reach areas. Perfect for use with M.G. Audio/Video Head Cleaner (cat. no. 407C), or for applying M.G. Super Contact Cleaner (cat. no. 801B). Available single headed or double headed for economy.
|
Use when requiring a contact cleaner with lubrication that offers long-term protection from oxidation. Reduces contact scrubbing and reduces connection wear and abrasion failures. Protects, lubricates and deoxidizes IC's, connectors, jacks, relays, contacts, switches, plugs, batteries, controls, potentiometers and more. Also available in micro tip pen format.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is MG Chemical's Green Glow in The Dark 3D printing filament. MG Chemicals manufactured this filament with high purity Acrylonitrile Butadiene Styrene (ABS) pellets with a tight diameter tolerance. MG incorporated a luminescent formula to provide a lighting effect in the dark by absorbing natural and man made light. This type of filament resists higher temperatures and offers great machinability, flexibility and strength. This makes this type of filament a popular and ideal choice for professionals and engineers. You do need a heated bed printer to work with this filament material.
|
Highly absorbent precision cleaning applicator Shred resistant, 100% urethane foam heads with 100 PPI porosity over extra absorbent U.S.B. pharmaceutical grade purified cotton. Bonded securely to a 6" birch staff. Compatable with most solvents. Available in packs of 10, 50, and 250, 1000.
|
This is a spool of White Polylactide 3D printer filament. These filaments are a corn based product manufactured from high temperature and high purity plastic pellets. It can easily stick to masking tape and does not call for a heated print bed. The filament is a very hard, acetone resistant plastic that can obtain faster printing speeds and lower layer heights when used properly. The filaments that are Polylactide (PLA) have printing temperatures from 210 up to 230 Degrees Celsius.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a spool of black Polyethylene terephthalate glycol-modified (PETG) 3D printer filament.The PETG is a high strength transparent thermoplastic with superior moisture and chemical resistance. With this material, you do not need a heated print bed and is easy to use due to its low shrinkage. This 3D printer filament is excellent for tasks that call for strong, transparent prints. The PETG filaments is used in mechanical parts fabrication and also in robots. This printing temperature goes from 210 up to 240 Degrees Celsius.
|
Ideal for high temperature environments. Silicone Conformal Coating (422B) is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. It protects and insulates electrical and electronic components and assemblies, including generators, motors, transformers, relays, and solenoid coils. For spraying, liquid can be thinned using M.G. Thinner Cleaner. Thin up to one half part thinner to one part coating.
|
For use with Super Duster 134 Refill canisters (402AR) Allows user precision control and greater comfort. This high quality threaded chrome valve is for use with Cat# 402AR Super Duster Refill aerosol cans, and can be used over and over. It simply screws onto the top of the can, and can be easily removed at any time later without damage to the valve or the can, even if the can's contents have not been depleted. When used instead of standard valves, the Trigger Valve gives the user better control of flow, a higher maximum rate of flow, and increased comfort.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
402E is a portable, hand-held, eco-friendly electronic blower that’s an alternative to using compressed air for removing dust in hard-to-reach areas. This duster has multiple settings, balancing performance with battery life and unlike compressed air products, does not get cold during extended use.
|
This is a wood filament spool made by MG Chemicals. This filament is manufactured with a blend of polylactic acid (PLA) and poplar wood particles. This material was specially designed to act like wood for it can be painted, sanded and even has the smell of wood. This is great for those want to use something a little different with their 3D printer. The printing temperature for this wood filament is 365 up to 446 Degrees Fahrenheit and different temperatures will affect the color of the final product. With this unique type of filament, you do not need a heated bed in your printer.
|
Non-corrosive. Bond capacitors, resistors and integrated circuits to PCBs' seals exposed wires, faying surfaces, connectors. Meets MIL-A-46146B. UL HB recognition.
|
|
|
