|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Sponge for Iron Stands, no holes. The TC205 is suitable for the use with PH50, PH1201ESD, PH1201FE, PH1301ESD, and PH1503 Weller Stands.
|
|
This is the 3/32" screwdriver solder tip for the TC201 series iron. This tip is constructed with solid copper and is plated with iron, providing a maximum heat transfer from the heater down to the solder tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 455 is a 2" x 4" Refill Sponge for the #400 Iron Stand, 8800 and 9800 series, 400 tray.
|
This is the PTA7 1.6 x 15.75 mm screwdriver soldering tip with solid copper construction, nickel and chromium behind the working surface. This product was designed to provide maximum heat transfer from the heater to the tip. This PT series tip is for use with the TC201 series soldering irons.
|
This is a .062 x .62 x 800 degree PT Series Screwdriver Tip for TC201 Series Iron with solid copper construction, nickel and chromium behind the working surface. This soldering tip was designed to provide the maximum heat transfer from the heater down to the tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the .093" x .62" x 800 degree PT Series Screwdriver Tip for use with TC201 Series Iron. Designed to provide the maximum heat transfer from heater down to the tip.
|
1/8" Soldering Screwdriver Tip, 700 degree Fahrenheit
|
This is the .187" x .62" x 700 degree PT Series Screwdriver Tip for TC201 Series Iron. This tip is made of solid copper with iron plating and tinned with lead-free solder. This product was designed to provide the maximum heat transfer from the heater down to the tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the .234" x .62" x 800 degree PT Series Screwdriver Tip for TC201 Series Iron. It is made up of solid copper, and is tinned with lead free-solder. This product was specially designed to provide the maximum heat transfer from the heater down to the Tip.
|
This is the .031" x 1.00" x 800 degree PT Series Long Conical Tip for the TC201 Series Iron. This product was designed specifically to maximize the heat transfer from the heater down to the tip.
|
This is the .031" x 0.62" x 700 degree PT Series Conical Tip for the TC201 Series Iron. This soldering tip is constructed with solid copper and an Iron-Plated finish, allowing for maximum heat transfer from the heater down to the tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 0.031" x 0.62" x 800 Degree conical soldering iron tip that is constructed with solid copper and tinned with lead-free solder. This solder tip was specifically designed to maximize the heat transfer from the heater down to the tip.
|
Knurled Tip Nut for WP25 and WP40 Soldering Irons
|
1/32" x 700 degree Fahrenheit Conical Soldering Tip made to use with the TC201 Soldering Iron. The tip is constructed with solid copper and plated with iron, providing a maximized heat transfer from the heater down to the tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the .031" x 1.00" x 700 degree PT Series Long Conical Tip for TC201 Series Iron. The tips are made up of solid copper and are plated with iron to provide the maximum heat transfer from the heater down to the tip.
|
The Narrow Screwdriver Soldering Tip 1/16" 700 Degrees Fahrenheit, is made to be used with TC201 Soldering Irons. Constructed with solid copper and plated with iron to provide the maximum heat transfer from the heater down to the tip.
|
This is a .063" x 0.750" ST Series Screwdriver Tip made for WP25, WP30, WP35, WLC100 soldering irons and soldering stations. The ST series soldering tips features precision ground copper tip is plated with iron, nickel and chromium, tinned with lead-free alloy.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the .031" x 0.750" ST Series Single Flat Tip for WP25, WP30, WP35, soldering irons and WLC100 soldering station. This soldering tip features precision ground copper tip and is plated with iron, nickel and chromium, tinned with lead-free alloy.
|
This is a .031" x 0.750" ST Series Conical Tip for WP25, WP30, WP35, WLC100
|
This is a .031" x 0.750" ST Series Screwdriver Tip for WP25, WP30, WP35, WLC100.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a .062" x .750" ST Series Nar Screwdriver Tip for WP25, WP30, and WP35 solder irons, and WLC100 soldering station. The soldering tip is constructed out of copper and is finished with iron, nickel and chromium in order to maximize heat transfer from the heater down to the tip.
|
This is a .093" x 0.750" ST Series Screwdriver Tip for WP25, WP30, WP35, WLC100
|
This is a .125" x .027" x .625" ET Chisel Screwdriver Tip for PES51 Soldering Pencil
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.031 x .012 x .625 ET Series Conical Tip for PES51 Soldering Pencil
|
This is the ETA. It is a .062" x .032" x .625" ET Screwdriver Tip for PES51 Soldering Pencil. With a sensor hole in the tip's base and is fitted with a stainless steel liner. This prevents the tip from seizing to sensor.
|
This is the ETB; it is a .093" x .020" x .625" ET Chisel Screwdriver Tip for PES51 Soldering Pencil. The sensor hole is in the base of the tip and is fitted with a stainless steel liner. This prevents the tip from seizing to the sensor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a .187" x .035" x .625" ET Series Chisel Soldering Screwdriver Tip for PES51 Soldering Pencil. The sensor hole in the base of the tip is fitted with a stainless steel liner which prevents the tip from seizing to the sensor.
|
This is a .031" x .012" x 1.00" Long Screwdriver Tip for PES51 Soldering Pencil. Sensor hole in the base of the soldering tip is fitted with a stainless steel line, which prevents the tip from seizing to the sensor.
|
This is a .078" x .027" x 1.00" Long Screwdriver Tip for the PES51 Soldering Pencil. The sensor hole in the base of the tip is fitted with a stainless steel liner. This prevents the tip from seizing to the sensor.
|
|
|
