|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1 White 1/25"(1mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
#2 Yellow 1/16"(1.5mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
#3 Green 1/12"(2mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#4 Blue 1/10"(2.5mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
#5 Brown 1/8"(3mm) on ESD Safe bobbins of 5'(1.5M). Fine Braid Super Wick is a tightly woven, oxide-free copper solder wick coated with RMA flux. Its high purity and tight weave make it fast-wicking, quickly removing solder and minimizing dwell time.
|
Replacement tip for J-045-DS 45 watt corded desoldering iron. Nickel plated copper. 2 tips per package.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a .093" Outside Diameter x .043" Inside Diameter x .75" Reach Threaded Tiplet for Desoldering Tools. This part is finished with Iron, Chromium and Nickel-Plated.
|
This is a .093" Outside Diameter x .046" Inside Diameter x .5" Reach Threaded Tiplet for Desoldering Tools. For use with DS80 and DSV80 Desoldering Tools. It is constructed with stainless steel and finished with iron, chromium and nickel-plated.
|
This is a .125" Outside Diameter x .073" Inside Diameter x .5" Reach Threaded Replacement Tiplet for Desoldering Tools. For use with DS80 and DSV80 desoldering tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the Collector Tube Assembly with Gaskets for DS Series Desoldering Stations.
|
Replacement Desoldering Nozzle; 1.6mm,802/807/808/817
|
Replacement Desoldering Nozzle; 1.3mm,802/807/808/817
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Desoldering Nozzle 2.3mm,802/807/808/817,888-066
|
45 WATT ELECTRIC CORDED DESOLDERING IRON
|
23.5" x 19.5" Anti-Static Mat
6ft Grounding Cable is a Coiled Retractable Cable
To Safeguard Both Personnel and Electronic Devices from Static Buildup and Discharge.
|
|
|
|
|
|
|
|
|
|
|
|
|
Desoldering Pump, also known as a solder sucker, is a manually-operated device which is used to remove solder from a printed circuit board. This plunger type has a cylinder with a spring-loaded piston which is pushed down and locks into place. When triggered by pressing a button, the piston springs up, creating suction that sucks the solder off the soldered connection.
|
|
|
