|
|
|
|
|
|
|
|
|
|
|
|
|
AVK END PLATE - GRAY
Terminal Blocks are manufactured with one open end allowing side by side placement. An end plate is necessary for the last terminal block in the assembly enabling full enclosure.
1.2mm Width, Fits all AVK Series Terminal Blocks.
|
Optional Feed-Through Solder Terminals for use with Cinch 140 series terminal blocks.
|
END STOP - BEIGE
To prevent terminal blocks from sliding off the DIN Rail, they must be secured on each side. This is accomplished with end brackets screwed onto the rail. Two end brackets are necessary - one on each side of the continuous assembly designed.
Screw-type end bracket mounted on 35mm type of DIN-rail. Can be used together with Screw Connection feed-through one level terminals.
8mm Wide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AVK END STOP - GRAY
To prevent terminal blocks from sliding off the DIN Rail, they must be secured on each side. This is accomplished with end brackets screwed onto the rail. Two end brackets are necessary - one on each side of the continuous assembly designed.
Screw-type end bracket mounted on 35mm type of DIN-rail. Can be used together with Screw Connection feed-through one level terminals.
8mm Wide
|
Terminal Blocks are manufactured with one open end allowing side by side placement. An end plate is necessary for the last terminal block in the assembly enabling full enclosure.
|
Terminal Blocks are manufactured with one open end allowing side by side placement. An end plate is necessary for the last terminal block in the assembly enabling full enclosure.
FITS 351100 FUSE HOLDER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional Feed-Through Solder Terminals for use with Cinch 141 series terminal blocks.
|
Terminal marker strip 2 position, 141 series
|
Terminal marker strip 3 position, 141 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terminal marker strip 3 position, 142 series
|
AVK PARTITION PLATE - GRAY
Partition/Separation Plates create a barrier between groups of terminals.
1.2mm Width, Fits all AVK Series Terminal Blocks.
|
Terminal marker strip 3 position, 140 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terminal marker strip 4 position, 141 series
|
Terminal marker strip 6 position, 140 series
|
2.5 mm2 DIN Rail Feed-Through Terminal Block. Gray
Width: 5 mm, Accepts 26-12AWG Wire
UL/CSA: 20A 600VAC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.5 mm2 DIN Rail Feed-Through Terminal Block. RED
Width: 5 mm, Accepts 26-12AWG Wire
UL/CSA: 20A 600VAC
|
2.5 mm2 DIN Rail Feed-Through Terminal Block. GREEN
Width: 5 mm, Accepts 26-12AWG Wire
UL/CSA: 20A 600VAC
|
2.5 mm2 DIN Rail Feed-Through Terminal Block. BEIGE
Width: 5 mm, Accepts 26-12AWG Wire
UL/CSA: 20A 600VAC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional Feed-Through Solder Terminals for use with Cinch 142 series terminal blocks.
|
Over Barrier, Flanged Spade Terminal Jumper for 140 Series
|
Terminal marker strip 4 position, 142 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terminal marker strip 6 position, 142 series
|
4 mm2 DIN Rail Feed-Through Terminal Block.
Width: 6 mm, Accepts 26-10AWG Wire
UL/CSA: 30A 600VAC
|
Over Barrier, Ring Tongue Terminal Jumper for 141 Series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terminal marker strip 8 position, 140 series
|
Around Barrier, Ring Tongue Terminal Jumper for 141 Series
|
Terminal marker strip 8 position, 141 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terminal marker strip 8 position, 142 series
|
Terminal marker strip 9 position, 141 series
|
DIN Rail Terminal Block. Width: 10 mm. Feed-Through Terminals
|
|
|
