|
|
|
|
|
|
|
|
|
|
|
|
|
|
This replacement fuse is for any Meterman or Amprobe meter 30XR including a meter sold under these brand names: Beckman, Beckman-Wavetek, Beckman-Meterman, Wavetek and Wavetek-Meterman meters. Fuse measures 10mm x 38mm.
|
Holster for LCR55 Component Tester. Protective rubber holster . Accommodates tilt stand on meter
|
Amprobe TL73C ground lead with alligator clip for Amprobe DM73C Pen style multimeter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quickly test sockets and confirm GFCI breakers are properly wired for protection with the ST102B.
|
OPTIONAL EXTERNAL TEMPERATURE PROBE
|
Amprobe VC221B Padded Vinyl Case. Fits Meter and Holster.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DM78C is the smallest go-anywhere meter that measures voltage, continuity, diode and resistance. Auto-off saves batteries. 3200-count display with analog bargraph. Data hold feature. Protective case included.
|
The IR610A is a portable, easy-to-use 3-1/2-digit, compact-sized digital infrared thermometer capable of measuring C and F temperature. Narrow 10:1 field of view measures 1in at 10in distance.
|
A must have tool for everyday applications, the Amprobe IR-450 3-in-1 Infrared Pocket Thermometer, Laser Pointer, and Flashlight offers a uniquely small and convenient form factor with professional 8:1 distance to spot ratio, a high-quality laser pointer and LED flashlight. Much more portable than traditional infrared thermometers, the IR-450 Infrared Pocket Thermometer can be readily for quick diagnostic checks in a wide variety of applications including: HVAC/R, fire safety and protection, industrial maintenance, automotive and quality control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Amprobe PM55A is the ultimate pocket-sized multimeter. Only 3/8" thick and less than 3 oz in weight with full functionality offering AC and DC voltage measurement to 600 V, AC and DC current to 2000 uA, resistance to 6 Megohm, capacitance to 2000 ?F, frequency to 30 kHz, diode test and continuity with beeper. It also offers VolTect, a built-in, non-contact voltage detection feature for AC voltages. Another key feature of this pocket multimeter is AutoTect, which automatically selects between AC and DC voltage, or resistance measurement based on the test point to which the leads are connected. Fully auto ranging, this meter offers nine different measurement functions plus features that are usually found in much more expensive and larger meters. The digital display is oversized with large digits and unit icons in the display. In spite of its size, this pocket multimeter is fully safety rated to CAT III 300 V, CAT II 600 V and is UL listed. No other meter this small offers such performance and high safety ratings. The PM55A Pocket Multimeter includes a silicone protective holster, deluxe carrying case, attached test leads, battery and manual.
|
Take one-handed measurements with this pen-style digital multimeter and its built in probe.
600V AC and 600 V DC Ranges. Resistance to 34 MΩ.
Continuity beeper. Auto power off. UL 3111-1 listed
|
Take this small portable relative humidity and temperature meter, the Amprobe TH-1 anywhere for those quick comfort-level measurements. Easy to read dual display with data hold to freeze measurement result on the screen. Precision capacitive RH sensor with twistable protective cap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Amprobe 5XP-A Digital Multimeter provides superior features and accuracy in a smaller form factor. The 5XP-A has unique features such as VolTect� non-contact voltage detection and our exclusive Magne-Grip� holster that frees both hands for work. The 5XP-A is the�perfect choice for residential, commercial and general troubleshooting applications.
|
The Amprobe ACD-10 PLUS meter offers thinner jaws over standard clamp meters. clamp meter takes measurements of AC and DC voltage to 600V and AC current to 600A and offers Capacitance and Frequency. It also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 1.02''( 26mm)
|
Amprobe 15XP-B is the right choice for electronics engineers and field service technicians, featuring TTL logic test for digital circuits, diode test for component level troubleshooting, a special 2000M? measurement range, and an integrated tilt stand for convenience on the bench.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results.
|
For non-contact voltage testing, Amprobe 30XR-A Digital Multimeter offers Voltect� non-contact voltage technology built into the 30XR-A along with a full complement of measurement functions.
|
Let there be Light The Amprobe LM-100 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-100 measures a wide range of light up to 20,000 fc or lux with an accurate, high resolution of .01 fc/lux.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Amprobe TMD-10 Dual Temperature Portable Thermometer is a completely portable dual input thermometer. With a digital dual display that displays T1, T2 and T1-T2. Choose between Celsius or Fahrenheit degree measurement results. The TMD-10 will store and later display your minimum and maximum values. The TMD-10 measures temperature with either K-type or J-type thermocouples.
|
Slow that Baby Down Universal, economical tachometer measuring rotational or surface speed either in contact or non-contact way. Widely used to measure rotational speed of motors, conveyer belts and other moving or rotating systems.- Measures rotational and surface speed
- User selectable units for contact measurement: RPM, m/min, ft/min, yd/min
- Non-contact measurement in RPM
Included Accessories: Batteries (installed), users manual, reflective tape |
The ACD-14 PLUS is the perfect choice for both HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance and frequency. Its dual displays allows viewing amperage and voltage simultaneously. The ACD-14 PLUS meter offers thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 28 mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Where accuracy, quality, and newest technology meet. The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with red, rubber, Ribs design. The true-rms version addresses needs of professionals who rely on performance and reliability.
|
Amprobe's new ACD-23SW Swivel Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC/DC currents, voltage, resistance and capacitance as well as CAT III 600V safety ratings make this clamp on meter something you should swivel to see.
|
Blinded by the Light The Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Find Active Gas Leaks Easily and Accurately The Amprobe GSD600 Gas Leak Detector is a fast responding gas leak detector for methane and propane gas. The meter emits a frequency tone when gas is detected. The frequency of the beep coincides with the concentration of the gas. The LEDs display the level of gas present in an area or room. Pinpoint gas leaks for closed piping systems. Use the mute function in quiet work areas and utilize the LED displays. Or a standard earphone jack for hearing the meter in loud environments.
|
The Amprobe 37XR-A Digital Multimeter offers true-rms measurement along with component and logic testing for troubleshooting electronics at the bench or on the job site.
|
The Amprobe TR300 temperature and humidity data logger is designed to monitor indoor air quality in one compact size unit. The housing includes a wall-mount hook for easy installation. It has a large digital triple display and audible and visible alarms. Plus a fast responding sensor and electronics to help monitor the relative humidity and temperature of the indoor air. The TR300 has capacity to store 16,000 readings and ships with the unique Amprobe Download Suite software. Set up these parameters for recording: Sample interval timing, Start/ Stop, Dare and Time, HI/LO Alarm threshold, Unit Selection and number of Memory points. Download Suite software works with all Amprobe devices and stores the data from the TR300 for further analysis.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We are Going to Need Ear Plugs The Amprobe SM-10-A Sound Meter has been designed to check compliance with safety regulations and perform acoustic analysis by safety engineers, health, industrial and safety offices as well as quality control.
|
Rugged and reliable for utility, industrial and mine safety applications, the TIC 300 PRO with VolTect™ is a Non-Contact, High Voltage Detector that verifies the presence of voltage in low, medium and high voltage test applications up to 122 KV without contacting the energized conductor. The intuitive VolTect™ alert provides bright visual and loud audible indication when used in close proximity to an energized line. This high voltage detector additionally features: - A universal adapter for use with electrical Hot Stick TIC 410A for voltage higher than 1500 VAC.
- Push button functionality for ease of use with PPE gloves
- MSHA certification for use in mining applications
- Simple two setting navigation
|
|
|
